Slot[X].Poles.one; Slot[X].Poles.two - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual

slot[X].poles.one

This attribute indicates if a one-pole setting is supported for the channels on the card.
Type TSP-Link accessible
Attribute (R) Yes
Usage
onePole = slot[X].poles.one
onePole
X
Details
This attribute only exists if a card is installed and if the card supports one-pole settings for the channels on the
card. If not, the value is nil. If supported, the value is 1.
Example
print(slot[3].poles.one)
Also see
slot[X].poles.four

slot[X].poles.two

slot[X].poles.two
This attribute indicates if a two-pole setting is supported for the channels on the card.
Type TSP-Link accessible
Attribute (R) Yes
Usage
twoPole = slot[X].poles.two
twoPole
X
Details
This attribute only exists is a card is installed and if the card supports a two-pole setting for the channels on the
card.
If not, the value is nil. If supported, the value is 1.
707B-901-01 Rev. A / August 2010
Affected by
Not applicable
The return value
Slot number (1 to 6)
(on page 7-170)
(on page 7-171)
Affected by
Not applicable
The return value
Slot number (1 to 6)
Where saved Default value
Not applicable Not applicable
Query to see if Slot 3 supports one-pole
settings for the channels on the card.
Output if card supports one pole:
1.000000000e+00
Output if card does not support one pole:
nil
Where saved Default value
Not applicable Not applicable
Section 7: Command reference
7-171