Communication Connections - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual

Communication connections

The following topics describe how to connect the cable connections for the communication interfaces.
To properly set up the communications interfaces after connection, see the information in
Communication interfaces
Connect the USB cable
To connect the USB cable:
Connect the Type B end of the USB cable to the connector on the back of the instrument (shown
below).
707B-901-01 Rev. A / August 2010
(on page 2-24).
Figure 3: Model 707B rear panel USB connection
USB
connection
Figure 4: Model 708B rear panel USB connection
I/O
LAN
USB Type B
connection
LINE RATING
100-240VAC
50, 60Hz
210VA MAX.
LINE FUSE
SLOWBLOW
2.0A, 250V
LAN
R
TSP-Link
CAUTION
! : REFER TO SAFETY INSTRUCTIONS IN
MANUAL BEFORE CONNECTING TO
EXTERNAL HAZARDOUS VOLTAGES (>42V)
R
TSP-Link
Section 2: General operation
2-3