Models 707B and 708B Switching Matrix Reference Manual
3. Perform any of the following actions:
•
Open the channels in the channel pattern: Press OPEN.
•
Close the channels in the channel pattern without affecting any other channels: Press CLOSE.
•
Close the channels in the channel pattern and open any other closed channels on the instrument:
Select PATT and select EXCLOSE. Press ENTER to open or close the channels.
•
Close the channels in the channel pattern and open any other closed channels on the slot: Press PATT
and select EXSLOTCLOSE. Press ENTER to open or close the channels.
To close or open the channels in a channel pattern from the web interface:
1. From the list on the left, select a slot with an installed card.
2. Click Pattern. The Channel Pattern Configuration dialog box is displayed.
707B-901-01 Rev. A / August 2010
Figure 56: Channel Pattern Configuration dialog box
Section 2: General operation
2-103