Section 7: Command reference
Also see: Related commands and information
The Also see section of the instrument control command description lists commands that are related
to the command being described.
Instrument Control Library (ICL) command reference
beeper.beep()
This function generates an audible tone.
Type
TSP-Link accessible
Function
Yes
Usage
beeper.beep(duration, frequency)
duration
frequency
Details
The beeper will not sound if it is disabled. It can be disabled or enabled with beeper.enable, or through the
front-panel Main Menu.
Example
beeper.enable = 1
beeper.beep(2, 2400)
Also see
beeper.enable
7-8
Figure 92: Links to related commands and information
Affected by
The amount of time to play the tone in seconds; the allowable range is 0.1 s to 100 s
The frequency of the tone in Hertz (Hz)
(on page 7-9)
Models 707B and 708B Switching Matrix Reference Manual
Where saved
Default value
Enables the beeper and generates a
two-second, 2400 Hz tone.
707B-901-01 Rev. A / August 2010