Channel.getlabelcolumn() - Keithley 708B Reference Manual

Section 7: Command reference
Example
channel.reset("1A01")
print(channel.getlabel("1A01"))
channel.setlabel("1A01", "Device")
print(channel.getlabel("1A01"))
Also see
channel.setlabel()
Data retrieval commands

channel.getlabelcolumn()

This function retrieves the label that was assigned to a column.
Type TSP-Link accessible
Function Yes
Usage
label = channel.getlabelcolumn(channelList)
label
channelList
Details
The parameter channelList can contain more than one channel. Use a comma to delimit the labels for the
channels. The return string label lists the labels in the same order that the channels are specified.
You cannot specify a channel pattern.
The channelList parameter can contain slotX (where X equals 1 to 6 for Model 707B, or 1 for Model 708B)
or allslots. It can also contain a label. However, if the label exists, it is in the returned response and not the
numeric channel number.
Example
channel.setlabelcolumn("1A01", "DUT1")
channel.setlabelcolumn("1A03", "DUT2")
print(channel.getlabelcolumn("1a01:1a12"))
Also see
channel.getlabelrow()
channel.setlabelcolumn()
channel.setlabelrow()
7-32
(on page 7-46)
Affected by
System reset
Channel reset
A string that lists the comma-delimited labels for the items in channelList
A string that lists the channels to query for the labels associated with them
(on page 7-33)
(on page 7-47)
(on page 7-49)
Models 707B and 708B Switching Matrix Reference Manual
This example resets the channel, prints the
default label of the channel, sets the label to
"Device", and returns the new label.
Output:
1A01
Device
Where saved Default value
Create Empty string or blank
configuration script
Label all the column labels on a card
Output:
DUT1,,DUT2,,,,,,,,,
Also note the change on the display
707B-901-01 Rev. A / August 2010