Digio.trigger[N].Release() - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual
Usage
width = digio.trigger[N].pulsewidth
digio.trigger[N].pulsewidth = width
width
N
Details
Setting width to zero (0) (seconds) asserts the trigger indefinitely. To release the trigger line, use

digio.trigger[N].release().

Example
digio.trigger[4].pulsewidth = 20e-6
Also see
digio.trigger[N].assert()
digio.trigger[N].reset()
digio.trigger[N].release()
digio.trigger[N].release()
This function releases an indefinite length or latched trigger.
Type TSP-Link accessible
Function Yes
Usage
digio.trigger[N].release()
N
Details
Releases a trigger that was asserted with an indefinite pulse width time, as well as a trigger that was latched in
response to receiving a synchronous mode trigger. Only the specified trigger line (N) is affected.
Example
digio.trigger[4].release()
Also see
digio.trigger[N].pulsewidth
707B-901-01 Rev. A / August 2010
The pulse width (seconds)
Digital I/O trigger line (1 to 14)
(on page 7-57)
(on page 7-62)
(on page 7-61)
Affected by
Digital I/O trigger line (1 to 14)
(on page 7-60)
Sets the pulse width for trigger line 4 to
20 μs.
Where saved Default value
Releases digital I/O trigger Line 4.
Section 7: Command reference
7-61