Using The Instrument Control Library Documentation; Command Name And Standard Parameters Summary - Keithley 708B Reference Manual

Section 7: Command reference

Using the Instrument Control Library documentation

The Instrument Control Library documentation contains detailed descriptions of each of the
instrument control commands you can use to control your Models 707B and 708B. Each instrument
control command description is broken into several standardized subsections. The figure below
shows an example of an instrument control command description.
Figure 87: Example instrument control library description
Each instrument control command listing is divided into five major categories of information about the
command:
•
Command name and standard parameters table
•
Usage
•
Details
•
Example
•
Also see
The content of each of these categories is described in the following topics.

Command name and standard parameters summary

The beginning of each ICL command description starts with the command name, followed by a table
with relevant information for each command. Definitions for the numbered items in the figure below
are listed following the figure.
7-4
Models 707B and 708B Switching Matrix Reference Manual
707B-901-01 Rev. A / August 2010