Lan.trigger[N].Stimulus - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual
Details
This attribute can initialize the pseudo state to a known value.
Setting this attribute will not cause the LAN trigger to generate any events or output packets.
ON or OFF cannot be used when setting the pseudostate.
Example
print(lan.trigger[1].pseudostate)
Also see
None

lan.trigger[N].stimulus

This attribute specifies events that cause this trigger to assert.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
triggerStimulus = lan.trigger[N].stimulus
lan.trigger[N].stimulus = triggerStimulus
triggerStimulus
N
Details
This attribute specifies which event causes a LAN trigger packet to be sent for this trigger. The events
(triggerStimulus) may be one of the existing trigger event IDs, shown in the following table.
707B-901-01 Rev. A / August 2010
Get the present simulated line state for the LAN
event 1.
Affected by
System reset
LAN trigger N reset
The LAN event identifier used to trigger the event
A number specifying the trigger packet over the LAN for which to set or query
the trigger source (1 to 8)
Where saved Default value
Create 0
configuration script
Section 7: Command reference
7-123