Status.standard - Keithley 708B Reference Manual

Section 7: Command reference

status.standard.*

These attributes manage the status model's standard register set.
Type TSP-Link accessible
Attribute - -
.condition (R) Yes
.enable (RW) Yes
.event (R) Yes
.ntr (RW) Yes
.ptr (RW) Yes
Usage
standardRegister = status.standard.condition
standardRegister = status.standard.enable
standardRegister = status.standard.event
standardRegister = status.standard.ntr
standardRegister = status.standard.ptr
status.standard.enable = standardRegister
status.standard.ntr = standardRegister
status.standard.ptr = standardRegister
standardRegister
Details
Although the status logical instrument reset affects these attributes, a system reset does not.
These attributes are used to read or write to the standard event status registers.They are set using a constant or
a decimal value, but are returned as a decimal value. The binary equivalent of the value indicates which register
bits are set. In the binary equivalent, the least significant bit is bit B0, and the most significant bit is bit B7. For
example, if a value of 1.29000e+02 (which is 129) is read as the value of the condition register, the binary
equivalent is 10000001. This value indicates that bit B0 and bit B7 are set.
B7
Most
significant
bit
1
Assigning a value to this attribute enables one or more status events. When an enabled status event occurs, the
corresponding bit is set in the enable register.
7-188
Affected by
- -
Not applicable
Status reset
Status reset
Status reset
Status reset
The standard event register's status in decimal form. A zero (0) indicates no bits set
(also send 0 to clear all bits). Other decimal values indicate various bit settings.
B6 B5
> >
0 0
Models 707B and 708B Switching Matrix Reference Manual
Where saved
- -
Not saved
Not saved
Not saved
Not saved
Not saved
B4 B3
> >
0 0
Default value
- -
Not applicable
0
0
0
253 (All bits set)
B2 B1
> >
significant
0 0
707B-901-01 Rev. A / August 2010
B0
Least
bit
1