Lan.trigger[N].Disconnect(); Lan.trigger[N].Event_Id - Keithley 708B Reference Manual

Section 7: Command reference

lan.trigger[N].disconnect()

This function disconnects the LAN trigger.
Type TSP-Link accessible
Function Yes
Usage
lan.trigger[N].disconnect()
N
Details
For TCP connections, this closes the TCP connection.
The LAN trigger automatically disconnects when either the lan.trigger[N].protocol or
lan.trigger[N].ipaddress attributes for this event are changed.
Also see
lan.trigger[N].ipaddress
lan.trigger[N].protocol

lan.trigger[N].EVENT_ID

This constant is the event identifier used to route the LAN trigger to other subsystems (using stimulus properties).
Type TSP-Link accessible
Constant Yes
Usage
lan.trigger[N].EVENT_ID
N
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to incoming LAN
trigger packets.
Example
digio.trigger[14].stimulus =
lan.trigger[1].EVENT_ID
Also see
None
7-118
Affected by
The LAN event number (1 to 8)
(on page 7-119)
(on page 7-122)
Affected by
The LAN event number (1 to 8)
Models 707B and 708B Switching Matrix Reference Manual
Where saved Default value
Where saved Default value
Route an occurrence of a trigger on
LAN trigger 1 to digital I/O
trigger 14, then generate the event
ID for digital I/O trigger 14.
707B-901-01 Rev. A / August 2010