Scriptvar.list(); Scriptvar.name - Keithley 708B Reference Manual

Section 7: Command reference
Save the script in nonvolatile memory after setting the autorun attribute to save the change when
the instrument is turned off.
Example
test5.autorun = "yes"
test5.save()
Also see
None

scriptVar.list()

This function generates a script listing.
Type TSP-Link accessible
Function No
Usage
scriptVar.list()
scriptVar
Details
This function generates output in the form of a sequence of response messages (one message for each line of
the script). It also generates output of the script control messages (loadscript or loadandrunscript, and
endscript).
Example
beep.list()
Also see
Create a script by sending commands over the remote interface
Retrieve source code line by line

scriptVar.name

This attribute changes or reads the name of a script in the runtime environment.
Type TSP-Link accessible
Attribute (RW) No
7-164
Models 707B and 708B Switching Matrix Reference Manual
NOTE
Assume a script named "test5" is in the runtime
environment.
The next time the instrument is turned on, "test5"
script automatically loads and runs.
Affected by
The name of variable that references the script
(on page 6-10)
Affected by
Not applicable
Where saved Default value
Generates output for the content of the script
named "beep."
(on page 6-5)
Where saved Default value
See Details Not applicable
707B-901-01 Rev. A / August 2010