Lan.trigger[N].Connect() - Keithley 708B Reference Manual

Section 7: Command reference
Also see
lan.trigger[N].assert()
lan.trigger[N].overrun
lan.trigger[N].stimulus
lan.trigger[N].wait()

lan.trigger[N].connect()

This function connects the lan.trigger instance to the listeners specified by protocol and IP address.
Type TSP-Link accessible
Function Yes
Usage
lan.trigger[N].connect()
N
Details
Prepares the event generator to send event messages. For TCP connections, this opens the TCP connection.
The event generator automatically disconnects when either the lan.trigger[N].protocol or
lan.trigger[N].ipaddress attributes for this event are changed.
Example
lan.trigger[1].protocol = lan.MULTICAST
lan.trigger[1].connect()
lan.trigger[1].assert()
Also see
lan.trigger[N].assert()
lan.trigger[N].ipaddress
lan.trigger[N].overrun
lan.trigger[N].protocol
lan.trigger[N].stimulus
lan.trigger[N].wait()
7-116
(on page 7-114)
(on page 7-121)
(on page 7-123)
(on page 7-125)
Affected by
The LAN event number (1 to 8)
(on page 7-114)
(on page 7-119)
(on page 7-121)
(on page 7-122)
(on page 7-123)
(on page 7-125)
Models 707B and 708B Switching Matrix Reference Manual
Where saved Default value
Set the protocol for LAN trigger 1 to be
multicast when sending LAN triggers.
Then, after connecting the LAN trigger,
send a message on LAN trigger 1 by
asserting it.
707B-901-01 Rev. A / August 2010