Scan.stepcount; Scan.trigger.arm.clear() - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual
Also see
scan.mode (on page 7-150)
scan.background()

scan.stepcount

This attribute contains the number of steps in the present scan.
Type TSP-Link accessible
Attribute (R) Yes
Usage
scanStepCount = scan.stepcount
scanStepCount
Details
This is set by the number of steps in the active scan list. The value of this attribute is initially determined when
the scan is created. Adding steps with the scan.create(), scan.addimagestep(), and scan.add()
functions updates this attribute's value.
Example
print(scan.stepcount)
Also see
scan.add() (on page 7-142)
scan.create()
scan.addimagestep()

scan.trigger.arm.clear()

This function clears the arm event detector.
Type TSP-Link accessible
Function Yes
Usage
scan.trigger.arm.clear()
Details
This function sets the trigger model's arm event detector to the undetected state.
707B-901-01 Rev. A / August 2010
(on page 7-144)
Affected by
Not applicable
The present step count value
(on page 7-146)
(on page 7-143)
Affected by
Where saved Default value
Not applicable Not applicable
Responds with the present step count.
Output assuming there are five steps in the
scan list:
5.0000000ee+00
Where saved Default value
Section 7: Command reference
7-153