Section 7: Command reference
Issuing this function on an existing pattern invalidates the existing scan list (the pattern may or may not be used
in the current scan list). Creating a new pattern does not invalidate the existing scan list.
Snapshots are lost when power is cycled. Channel patterns are stored when the createsconfigcript()
command is executed. Use the created script to restore them.
Channel patterns are lost when power is cycled. Channel patterns are stored when the
createsconfigcript() command is executed. Use the created script to restore them. See
channel.pattern.setimage() (on page 7-39) for valid name examples.
Example
channel.pattern.snapshot("voltagePath")
Also see
createconfigscript()
channel.pattern.catalog()
channel.pattern.delete()
channel.pattern.getimage()
channel.pattern.setimage()
7-42
(on page 7-50)
(on page 7-37)
(on page 7-38)
(on page 7-38)
(on page 7-39)
Models 707B and 708B Switching Matrix Reference Manual
NOTE
Creates a pattern named voltagePath that
contains the presently closed channels.
707B-901-01 Rev. A / August 2010