Section 7: Command reference
lan.config.ipaddress
This attribute describes the LAN IP address.
Type
TSP-Link accessible
Attribute (RW)
Yes
Usage
ipAddress = lan.config.ipaddress
lan.config.ipaddress = ipAddress
ipAddress
Details
This attribute specifies the LAN IP address to use when the LAN is configured using the manual configuration
method. This setting is ignored when DLLA or DHCP is used.
This attribute does not indicate the actual setting currently in effect. Use the lan.status attributes to determine
the current operating state of the LAN.
Example
ipaddress = lan.config.ipaddress
Also see
lan.restoredefaults()
lan.status.ipaddress
lan.config.method
This attribute describes the LAN settings configuration method.
Type
TSP-Link accessible
Attribute (RW)
Yes
Usage
method = lan.config.method
lan.config.method = method
method
Details
This attribute controls how the LAN IP address, subnet mask, default gateway address, and DNS server
addresses are determined.
7-104
Affected by
LAN restore defaults
LAN IP address. Must be a string specifying the IP address in dotted decimal
notation.
(on page 7-107)
(on page 7-110)
Affected by
LAN restore defaults
The method for configuring LAN settings. It can be one of the following
values:
•
lan.AUTO or 1: Selects automatic sequencing of configuration
methods
•
lan.MANUAL or 0: Use only manually specified configuration settings
Models 707B and 708B Switching Matrix Reference Manual
Where saved
Default value
Nonvolatile memory
"0.0.0.0"
Returns the presently set LAN IP address.
Where saved
Default value
Nonvolatile memory
lan.AUTO
707B-901-01 Rev. A / August 2010