Lan.trigger[N].Overrun - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual

lan.trigger[N].overrun

This attribute describes event detector overrun status.
Type TSP-Link accessible
Attribute (R) Yes
Usage
overrun = lan.trigger[N].overrun
overrun
N
Details
This attribute Indicates whether an event has been ignored because the event detector was already in the
detected state when the event occurred.
This is an indication of the state of the event detector built into the synchronization line itself. It does not indicate
if an overrun occurred in any other part of the trigger model, or in any other construct that is monitoring the event.
It also is not an indication of an output trigger overrun. Output trigger overrun indications are provided in the
status model.
Example
overrun = lan.trigger[5].overrun
print(overrun)
Also see
lan.trigger[N].assert()
lan.trigger[N].clear()
lan.trigger[N].stimulus
lan.trigger[N].wait()
707B-901-01 Rev. A / August 2010
Affected by
Not applicable
The trigger overrun state for the specified LAN packet (true or false)
The LAN event number (1 to 8)
(on page 7-114)
(on page 7-115)
(on page 7-123)
(on page 7-125)
Where saved Default value
Not applicable Not applicable
Checks the overrun status of a trigger with LAN
packet 5 and return the value, such as:
false
Section 7: Command reference
7-121