Scan.trigger.arm.set(); Scan.trigger.arm.stimulus - Keithley 708B Reference Manual

Section 7: Command reference
Example
scan.trigger.arm.clear()
Also see

scan.trigger.arm.set()

scan.trigger.arm.stimulus

Trigger model
scan.trigger.arm.set()
This function sets the arm event detector to the detected state.
Type TSP-Link accessible
Function Yes
Usage
scan.trigger.arm.set()
Details
This function sets the arm event detector of the trigger model to the detected state.
Example
scan.trigger.arm.set()
Also see
scan.trigger.arm.clear()
scan.trigger.arm.stimulus
Trigger model
scan.trigger.arm.stimulus
This attribute determines which event starts the scan.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
eventID = scan.trigger.arm.stimulus
scan.trigger.arm.stimulus = eventID
eventID
7-154
(on page 7-154)
(on page 7-154)
(on page 3-1)
Affected by
(on page 7-153)
(on page 7-154)
(on page 3-1)
Affected by
System reset
Scan reset
Trigger stimulus used for the channel action (arm layer); see Details
Models 707B and 708B Switching Matrix Reference Manual
Clears the arm event detector.
Where saved Default value
Sets the arm event detector to the detected
state.
Where saved
Create configuration script
707B-901-01 Rev. A / August 2010
Default value
0