Keithley 708B Reference Manual page 33

Section 2: General operation
If you are connecting to the instrument through GPIB, you may also see the following indicators:
•
TALK: Instrument is addressed to talk
•
LSTN: Instrument is addressed to listen
•
SRQ: Service request
•
REM: Remote communication
By default, the top line of the display shows the slot, row, and column of the selected channel. If
labels have been set up for your instrument, you might see four-character labels for your channels,
such as GATE+SMU1. See
To change the selected channel:
1. Press the navigation wheel to select the row.
2. Turn the navigation wheel to go to a different row.
3. Press the navigation wheel again to select the column.
4. Turn the wheel to go to a new column.
5. Press the navigation wheel or ENTER when selection is complete. The new channel is displayed.
After CLS (on the lower line of the display), the closed channels are listed. If no channels are closed,
<none> is displayed here. If the list of closed channels extends past one screen, "..." is displayed at
the end of the lower line. To see the full list of closed channels, press DISPLAY until the list of closed
channels is displayed.
For the Model 707B, also see
channel.
Display during setup
During setup, the display shows menu choices that you can use to configure the instrument.
To use the menus, you use the navigation wheel
item is selected, it blinks. Press the navigation wheel
In the following figure, the Main Menu is displayed, with arrows showing that there are additional
menu items.
2-14
Models 707B and 708B Switching Matrix Reference Manual
Set up labels (on page 2-98) for information on setting up labels.
NOTE
Selecting channels from the front panel (on page 2-17) to select a
to scroll through menu options. When a menu
or ENTER to select an option.
707B-901-01 Rev. A / August 2010