Models 707B and 708B Switching Matrix Reference Manual
timer.reset()
This function resets the timer to zero (0) seconds.
Type
TSP-Link accessible
Function
Yes
Usage
timer.reset()
Example
timer.reset()
...
time = timer.measure.t()
print(time)
Also see
timer.measure.t()
trigger.blender[N].clear()
This function clears the blender event detector and resets blender N.
Type
TSP-Link accessible
Function
Yes
Usage
trigger.blender[N].clear()
N
Details
This function sets the blender event detector to the undetected state and resets the event detector's overrun
indicator.
Also see
None
707B-901-01 Rev. A / August 2010
Affected by
(on page 7-200)
Affected by
The blender number (1 or 2)
Where saved
Default value
Resets the timer and then measures the time since
the reset.
Output:
1.469077e+01
The above output indicates that
timer.measure.t() was executed 14.69077
seconds after timer.reset().
Where saved
Default value
Section 7: Command reference
7-201