Trigger Functions And Attributes; Tsplink Functions And Attributes - Keithley 708B Reference Manual

Section 5: Remote commands

trigger functions and attributes

Use the trigger functions and attributes to control specific trigger objects.
trigger.blender[N].clear()
trigger.blender[N].EVENT_ID
trigger.blender[N].orenable
trigger.blender[N].overrun
trigger.blender[N].reset()
trigger.blender[N].stimulus[M]
trigger.blender[N].wait()
trigger.clear()
trigger.EVENT_ID
trigger.timer[N].clear()
trigger.timer[N].count
trigger.timer[N].delay
trigger.timer[N].delaylist
trigger.timer[N].EVENT_ID
trigger.timer[N].overrun
trigger.timer[N].passthrough
trigger.timer[N].reset()
trigger.timer[N].stimulus
trigger.timer[N].wait()
trigger.wait()

tsplink functions and attributes

These functions and attributes allow you to set up and work with a system that is connected with
TSP-Link.
tsplink.group
tsplink.master
tsplink.node
tsplink.readbit()
tsplink.readport()
tsplink.reset()
tsplink.state
tsplink.trigger[N].assert()
tsplink.trigger[N].clear()
tsplink.trigger[N].EVENT_ID
tsplink.trigger[N].mode
tsplink.trigger[N].overrun
tsplink.trigger[N].pulsewidth
tsplink.trigger[N].release()
tsplink.trigger[N].stimulus
tsplink.trigger[N].wait()
tsplink.writebit()
tsplink.writeport()
tsplink.writeprotect
5-16
(on page 7-201)
(on page 7-202)
(on page 7-202)
(on page 7-203)
(on page 7-203)
(on page 7-204)
(on page 7-205)
(on page 7-206)
(on page 7-206)
(on page 7-207)
(on page 7-207)
(on page 7-208)
(on page 7-209)
(on page 7-209)
(on page 7-210)
(on page 7-211)
(on page 7-211)
(on page 7-212)
(on page 7-213)
(on page 7-214)
(on page 7-214)
(on page 7-215)
(on page 7-215)
(on page 7-216)
(on page 7-216)
(on page 7-217)
(on page 7-218)
(on page 7-218)
(on page 7-219)
(on page 7-219)
(on page 7-220)
(on page 7-221)
(on page 7-222)
(on page 7-223)
(on page 7-224)
(on page 7-225)
(on page 7-226)
(on page 7-226)
(on page 7-227)
Models 707B and 708B Switching Matrix Reference Manual
707B-901-01 Rev. A / August 2010