Keithley 708B Reference Manual page 23

Section 2: General operation
Connect the LAN cable
Connect the LAN connector between the rear panel of the instrument and the host computer or
network router. You can use an LAN crossover cable (RJ-45, male/male) or straight-through cable.
The instrument automatically senses which cable you have connected.
The location of the LAN connector on the instrument is shown below.
The TSP-Link connectors will accept a LAN connection, but will not be identified as a LAN and will not
connect properly. Be sure to connect the LAN connector correctly.
2-4
NOTE
Figure 5: Model 707B rear panel LAN connection
LAN
connection
! CAUTION
Figure 6: Model 708B rear panel LAN connection
I/O
LAN
LAN connection
Models 707B and 708B Switching Matrix Reference Manual
LINE RATING
100-240VAC
50, 60Hz
210VA MAX.
LINE FUSE
SLOWBLOW
2.0A, 250V
LAN
R
TSP-Link
: REFER TO SAFETY INSTRUCTIONS IN
MANUAL BEFORE CONNECTING TO
EXTERNAL HAZARDOUS VOLTAGES (>42V)
R
TSP-Link
707B-901-01 Rev. A / August 2010