Unit Page - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual
Change the instrument date and time
To change the date and time of the instrument:
1. In the web interface, from the left navigation, click Admin. A login page is displayed.
2. Enter the current password in the Password box (the default is "admin").
3. Click Login. The Administration page is displayed.
4. Enter the Year.
5. Select the Month, Day, Hour, Minutes and Seconds from the lists.
6. Click Submit. The new time and date information takes effect immediately.

Unit page

Create Config Script: Save the set up of the instrument as a script.
To create the script:
1. Click Create Config Script. The Create Config Script dialog box is displayed.
2. To create a script that will run automatically when the instrument is powered on, select Auto-
execute on powerup. Note that this will overwrite the existing autoexec script.
3. To create a script with a new name, select Name and enter the name.
4. Click OK.
Reset: Resets all instruments in the TSP-enabled system. This is only available if the instrument is
the master.
Open All: Click this to open all relays on all slots.
Upgrade Firmware: Select a firmware upgrade file to download to the instrument and begin the
upgrade process.
Channel Connect Rule: Select the channel connect rule. See
operations (on page 2-89) for detail.
Digital I/O Lines: This is the tool to configure the 14 digital I/O lines of the instrument. Values can be
read or written to the ports, or each individual bit can be toggled. "Write Protect" can be set
individually for any I/O line.
707B-901-01 Rev. A / August 2010
Section 2: General operation
Connection methods for close
2-83