Channel Functions And Attributes - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual
The Test Script Processor (TSP) stores all numbers internally as IEEE Std 754 double-precision
floating point values. The logical operations work on 32-bit integers. Any fractional bits will be
truncated. For numbers larger than 4294967295, only the lower 32 bits will be used.
bit.bitand()
bit.bitor()
bit.bitxor()
bit.clear()
bit.get()
bit.getfield()
bit.set()
bit.setfield()
bit.test()
bit.toggle()

channel functions and attributes

About channel commands
Channel identifiers
The channels on the matrix cards are referred to by their slot, bank, row, and column numbers:
•
Slot number: The number of the slot in which the card is installed.
•
Bank: The bank number, if used by your card. See your card documentation.
•
Row number: The row number is either 1 to 8 or A to Z. See your card documentation.
•
Column number: Always two digits. For columns greater than 99, use A, B, C and so on to
represent 10, 11, 12, ...; the resulting counting sequence is: 98, 99, A0, A1, ..., A8, A9, B0,
B1, ...
Matrix channel examples
Reference
1A05
1C05
3C12
707B-901-01 Rev. A / August 2010
(on page 7-9)
(on page 7-10)
(on page 7-11)
(on page 7-11)
(on page 7-12)
(on page 7-13)
(on page 7-14)
(on page 7-15)
(on page 7-16)
(on page 7-17)
Slot Bank
1 N/A
1 N/A
3 N/A
NOTE
Row Column
1 05
3 05
3 12
Section 5: Remote commands
5-5