Models 707B and 708B Switching Matrix Reference Manual
Set beeper and key clicks
You can turn the instrument beeper and key click sounds on or off.
Disabling the beeper also disables the keyclicks. To enable keyclicks, you must also enable the
beeper.
To change the beeper or key click sounds from the front panel:
1. Press MENU.
2. Use the navigation wheel
3. Select KEYCLICK or BEEP.
4. Select ENABLE or DISABLE.
5. Press ENTER or press the navigation wheel
6. Press EXIT (LOCAL) to return to the Main Menu.
Menu options
The menus that can be accessed from the front panel of the instrument allow you to set up and run
the instrument.
Load Test menu options
Allows you to run scripts and code from the front panel that you created through the communication
interface.
To open this menu, press LOAD.
The User option loads code that was added to Load Test with the
74) command.
The Scripts option loads named scripts that were added to the runtime environment. See
scripts
(on page 6-3) for information on creating and loading scripts.
After selecting code or script from the User or Scripts option, you can press RUN to execute the
selected code or script.
Channel Attribute Menu options
The options in the Channel Attribute Menu allow you to configure channels from the front panel.
To open the Channel Attribute Menu, go to channel view. Select the channel for which you want to set
attributes, then press CONFIG, then press CHAN.
707B-901-01 Rev. A / August 2010
NOTE
to select BEEPER.
to save the change.
Section 2: General operation
display.loadmenu.add()
Manage
(on page 7-
2-21