Tspnet.tsp.runscript() - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual

tspnet.tsp.runscript()

This function loads and runs a script on a remote instrument.
Type TSP-Link accessible
Function Yes
Usage
tspnet.tsp.runscript(connectionID, script)
tspnet.tsp.runscript(connectionID, name, script)
connectionID
name
script
Details
This function is appropriate only for TSP-enabled instruments.
This function downloads a script to a remote instrument and runs it. It automatically adds the appropriate
loadscript and endscript commands around the script, captures any errors, and reads back any prompts.
No additional substitutions are done on the text.
The script is automatically loaded, compiled, and run.
Any output from previous commands is discarded.
This command does not wait for the script to complete.
To load only and run at a later time, make sure the script contains only functions. Use tspnet.execute() to
execute those functions at a later time.
If no name is specified, the script will be unnamed.
Example
tspnet.tsp.runscript(myconnection, "mytest",
"print([[start]]) for d = 1, 10 do print([[work]]) end print([[end]])")
Load and run a script entitled mytest on the TSP-enabled instrument connected with myconnection. The
source of mytest will be the contents of the string passed for the third parameter.
Also see
tspnet.execute()
707B-901-01 Rev. A / August 2010
Affected by
Integer value used as an identifier for other tspnet commands
The name that is assigned to the script
The body of the script as a string
(on page 7-230)
Where saved Default value
Section 7: Command reference
7-239