Models 707B and 708B Switching Matrix Reference Manual
To create a channel pattern from the web interface:
1. From the left navigation, click a slot.
2. Click Pattern (above the Channel Action Type box). The Channel Pattern Configuration dialog
box is displayed.
3. Enter a name in the box at the top.
4. From the Channels Available list, select the channels you want to add. You can use Ctrl+click and
Shift+click to select multiple channels.
5. Click Add.
6. When the Selected channel list is complete, click Create.
If you close the channels you want to add to the new pattern, you can enter a name and click
Snapshot to create the new pattern. The closed channels are added to a new pattern.
707B-901-01 Rev. A / August 2010
Figure 55: Channel pattern configuration dialog box
NOTE
Section 2: General operation
2-101