Section 7: Command reference
lan.applysettings()
This function re-initializes the LAN interface with new settings.
Type
TSP-Link accessible
Function
Yes
Usage
lan.applysettings()
Details
Disconnects all existing LAN connections to the instrument and re-initializes the LAN with the current
configuration settings.
This function initiates a background operation. LAN configuration could be a lengthy operation. Although the
function returns immediately, the LAN initialization will continue to run in the background.
Even though the LAN configuration settings may not have changed since the LAN was last connected, new
settings may take effect due to the dynamic nature of DHCP or DLLA configuration.
Re-initialization takes effect even if the configuration has not changed since the last time the instrument
connected to the LAN.
Example
lan.applysettings()
Also see
None
lan.config.dns.address[N]
Configures DNS server IP addresses.
Type
TSP-Link accessible
Attribute (RW)
Yes
Usage
dnsAddress = lan.config.dns.address[N]
lan.config.dns.address[N] = dnsAddress
dnsAddress
N
7-98
Models 707B and 708B Switching Matrix Reference Manual
Affected by
Re-initialize the LAN interface with new settings.
Affected by
LAN restore defaults
DNS server IP address
Entry index (1 or 2)
Where saved
Default value
Where saved
Default value
Nonvolatile memory
"0.0.0.0"
707B-901-01 Rev. A / August 2010