Trigger.timer[N].Delay - Keithley 708B Reference Manual

Section 7: Command reference
Example
print(trigger.timer[1].count)
Also see
trigger.timer[N].clear()
trigger.timer[N].reset()

trigger.timer[N].delay

This attribute sets and reads the timer delay.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
interval = trigger.timer[N].delay
trigger.timer[N].delay = interval
interval
N
Details
Each time the timer is triggered, it uses this delay period.
Assigning a value to this attribute is equivalent to:
trigger.timer[N].delaylist = {interval}
This creates a delay list of one value.
Reading this attribute returns the delay interval that will be used the next time the timer is triggered.
Example
trigger.timer[1].delay = 50e-6
Also see
trigger.timer[N].reset()
7-208
(on page 7-207)
(on page 7-211)
Affected by
System reset
Trigger timer N reset
Delay interval in seconds
Trigger timer number (1 to 4)
(on page 7-211)
Models 707B and 708B Switching Matrix Reference Manual
Read retrigger count for timer number 1.
Where saved Default value
Create 10e-6
configuration script
Set the trigger timer 1 to delay for
50 µs.
707B-901-01 Rev. A / August 2010