Slot[X].Idn - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual
Details
The time zone is only used when converting between local time and UTC time when using the os.time() and
os.date() functions. The instrument does not track daylight savings time.
If only one parameter is given, the same time offset is used throughout the year. If four parameters are given,
time is adjusted twice during the year for daylight savings time.
offset and dstOffset are strings of the form "[+|-]hh[:mm[:ss]]" that indicate how much time must be
added to the local time to get UTC time: hh is a number between 0 and 23 that represents hours; mm is a number
between 0 and 59 that represents minutes; ss is a number between 0 and 59 that represents seconds. The
minutes and seconds fields are optional.
The UTC-5 time zone would be specified with the string "5" because UTC-5 is 5 hours behind UTC and one
must add 5 hours to the local time to get UTC time. The time zone UTC4 would be specified as "-4" because
UTC4 is 4 hours ahead of UTC and 4 hours must be subtracted from the local time to get UTC.
dstStart and dstEnd are strings of the form "MM.w.dw/hh[:mm[:ss]]" that indicate when daylight savings
time begins and ends respectively: MM is a number between 1 and 12 that represents the month; w is a number
between 1 and 5 that represents the week within the month; dw is a number between 0 and 6 that represents the
day of the week (where 0 is Sunday). The rest of the fields represent the time of day that the change takes effect:
hh represents hours; mm represents minutes; ss represents seconds. The minutes and seconds fields are
optional.
The week of the month and day of the week fields are not specific dates.
Example
settimezone(8, 1, "3.3.0/02", "11.2.0/02" )
settimezone(offset)
Also see
gettimezone()
settime() (on page 7-167)

slot[X].idn

This attribute returns a string that contains information about the card in slot X.
Type TSP-Link accessible
Attribute (R) Yes
Usage
idnString = slot[X].idn
idnString
X
Details
The information that is returned depends on whether the card in the slot is an actual card or pseudocard.
For actual cards, this returns a comma-separated string that contains the model number, description, firmware
revision, and serial number of the card installed in slot X.
707B-901-01 Rev. A / August 2010
(on page 7-96)
Affected by
Not applicable
The return string
Slot number (1 to 6)
Sets offset to equal +8 hours, +1
hour for DST, starts on Mar 14 at 2:00
a.m, ends on Nov 7 at 2:00 a.m.
Sets local time zone to offset.
Where saved Default value
Not applicable Not applicable
Section 7: Command reference
7-169