3.5.6.8 Removing the Right Frame
1) Remove the 5 screws [1], and detach the right frame [2].
[2]
3.5.6.9 Removing the Shield Plate
1) Free the flat cable [1] from the connector.
2) Remove the 6 screws [2], and detach the shielding plate [3].
[2]
3.5.6.10 Removing the Rotary Drive Assembly
1) Disconnect the 4 connectors [1], and remove the 2 screws [2].
[1]
[2]
F-3-660
[1]
[1]
F-3-661
[3]
[1]
[2]
F-3-662
0011-6599
2) Disconnect the connector [1], and remove the 3 screws [2]; then, detach
the rotary drive assembly [3].
0011-6620
Be sure to tighten the self-tapping screw used to secure the rotary drive as-
sembly only at the end of the work.
3.5.6.11 Removing the Toner Cartridge Motor
1) Disconnect the connector [1], and remove the screw [2]; then, detach the
toner cartridge motor [3] from the rotary drive assembly.
0007-8872
3.5.6.12 Removing the Developing Rotary Motor
1) Remove the 2 screws [1], and detach the toner cartridge motor [2] from
the rotary drive assembly.
[2]
[1]
[1]
[1]
F-3-663
[2]
[1]
[2]
[3]
F-3-664
[3]
[2]
[1]
F-3-665
Chapter 3
[2]
0007-8873
0007-8874
3-101