Pilot Rail Kits; Figure 50: Pilot Rail Kit Parts - Oracle FS1-2 Customer Service Manual

limitations in some data centers. Also, you run the risk of not placing the Pilot in
the correct rack position and causing possible cabling issues.

Pilot Rail Kits

The Pilot rail kit contains the following items:
One slide rail that attaches to the rack posts
•
One mounting bracket that attaches to the Pilot chassis
•
CMA with six pre-installed cable clips
•
Four M4 x 5 fine-pitch mounting bracket securing screws (optional)
•
Manufacturer's instruction sheet
•
Tip: Ensure that you have all of the parts in the Pilot rail kit before you begin the
installation of the Pilot rails on the rack and the Pilot chassis.
Note: To locate part numbers for the rail kits, open
(https://support.oracle.com/handbook_private/index.html) and go to the
Oracle FS1 Flash Storage System components list. Part numbers are listed in the
components list.
The following figure shows the parts in the Pilot rail kit.

Figure 50: Pilot rail kit parts

Legend
1 Slide rails
2 Mounting brackets
3 Four M4 x 5 fine pitch mounting bracket securing screws (optional)
4 Installation card
Related Links
Install the Rack Rails for the Pilot
Oracle FS1–2 Global Procedures
Oracle System Handbook
81