Figure 99: Captive Screws To Secure Risers To The Motherboard - Oracle FS1-2 Customer Service Manual

Legend
1 Riser
2 Controller motherboard
2 After the riser is seated properly inside the Controller, tighten the two
captive Phillips screws on both sides of the riser to secure the riser on the
Controller motherboard.

Figure 99: Captive screws to secure risers to the motherboard

Legend
1 Riser 3 with latch
2 Riser 2
To install riser 3, lock the latch to secure the riser to the Controller
motherboard.
Controller Replacement Procedures
3 Riser 1
4 Captive screws
133