Installation Tools
Drive Tray Power-on Tool
A tool is available to assist in removing a stuck tape within a library tape drive. This
tool turns on a drive outside the library for the primary function of removing a
cartridge stuck within a library drive.
The drive tray toolkit part number is 314831204, which contains the instructions
(document 102084) and a drive power cable (part 419632401).
An AC power cord is required to use this tool. You must obtain a cord that is
appropriate for your region. The Drive Tray Power-on Tool is available from
iProcurement under the Zones online tool crib.
Installation Kits
Installation kits are supplied with each module. These contain the hardware required
to install each module. Kit part numbers are:
419838301—Base module
■
419844301—DEM and CEM
■
8-4 StorageTek SL3000 Systems Assurance Guide