Verify The Status Of A Drive Enclosure Component; Figure 142: Power Cooling Module (Right Side) - Oracle FS1-2 Customer Service Manual

Legend
2 As the power cooling module contacts the Drive Enclosure chassis
midplane, close the attachment lever.
To confirm that the power cooling module is properly closed, listen for an
audible click or feel the part engage with the Drive Enclosure chassis
midplane.

Figure 142: Power cooling module (right side)

Legend
3 Make sure that the power switch is off for the power cooling module.
4 Plug the power cord into the power cooling module.
5 Attach the power cord tie strap to the power cord.
6 Power on the replacement power cooling module.
When the power-on process completes, the following indicators should be
present:

Verify the Status of a Drive Enclosure Component

1 From Guided Maintenance, verify that the status of the component is
Normal.
Guided Maintenance displays a message stating the component status. A
status of Normal requires no action.
2 Close Guided Maintenance.
1 Power cooling module
1 Slide replacement power cooling module
into Drive Enclosure chassis slot
The Power status LED emits a steady green light.
•
All other LEDs are off.
•
Drive Enclosure Replacement Procedures
2 Opened attachment lever
2 Close the attachment
lever
172