Open The Controller Top Cover; Figure 67: Remove Power Supply Cords; Figure 68: Captive Thumb Screws To Remove The Top Cover - Oracle FS1-2 Customer Service Manual

Figure 67: Remove power supply cords

Legend
Tip: Always notify affected users that the Controller will be powered off.

Open the Controller Top Cover

1 Fully loosen the two captive thumb screws at the back of the top cover
using the Phillips number 2 screwdriver, if necessary.

Figure 68: Captive thumb screws to remove the top cover

1 Power supply cords
2 Power supply handle
Controller Replacement Procedures
98