Insert A Sas Hba; Figure 162: Disconnect The Bracket From The Sas Hba - Oracle FS1-2 Customer Service Manual

6 Hold the riser in one hand and use your other hand to carefully remove the
SAS HBA card from PCIe slot 4 of riser 3.
7 Using a Phillips Number 2 screwdriver, remove the two screws to
disconnect the rear bracket attached to the SAS HBA from the rear of the
PCIe riser.

Figure 162: Disconnect the bracket from the SAS HBA

Legend

Insert a SAS HBA

1 Unpack the component from its shipping carton.
1 Phillips Number 2 screwdriver
2 Screws that secure the bracket
3 SAS HBA
4 Bracket
Pilot Replacement Procedures
193