Replace A Drive Enclosure Drive; Prepare A Drive Enclosure For Component Replacement - Oracle FS1-2 Customer Service Manual

Important: Make sure that you remove the correct drive. Removing a drive other
than the failed drive can disrupt data access and possibly corrupt data.
The system generates an alert to notify you of a failed drive. The system also
notifies you when it detects that a drive might fail soon.

Replace a Drive Enclosure Drive

A failed Drive Enclosure drive degrades data throughput. Additionally, if more
than one drive begins to fail, data loss can occur. Replace a failed drive with a
drive of the same type and capacity as soon as possible.
Prerequisites:
•
•
•
Procedure Overview
1

Prepare a Drive Enclosure for Component Replacement

2 Remove a Drive
3 Insert a Drive
4 Verify the Status of a Drive Enclosure Component
Prepare a Drive Enclosure for Component Replacement
1 From Oracle FS System Manager (GUI), navigate to System > Hardware.
2 Select Drive Enclosures.
The GUI displays the Drive Enclosures Overview page. The Drive
Enclosures Overview page displays the status of the Drive Enclosure
components.
3 Select the Drive Enclosure containing the component that you want to
replace.
4 Select Actions > View.
The View Drive Enclosure dialog displays the list of replaceable Drive
Enclosure components in the Replaceable Unit list.
5 From the Replaceable Unit list, select the component that you want to
replace and click Replace Component.
Guided Maintenance displays the Introduction page, and guides you
through the steps to replace the Drive Enclosure component.
6 Click Next.
Guided Maintenance displays the Identify Hardware dialog.
Before handling a component, touch a grounded surface to discharge any
static electricity.
Attach an electrostatic discharge (ESD) wrist strap to your wrist, and stand
on an ESD mat while replacing components.
Make sure that the replacement drive has the same capacity and same type as
the drive to be replaced.
Drive Enclosure Replacement Procedures
157