Complete The Component Replacement; Verify Controller Component Status; Figure 119: Close Controller Top Cover - Oracle FS1-2 Customer Service Manual

Figure 119: Close Controller top cover

Legend

Complete the Component Replacement

1 Slide the Controller back into rack position.
2 Re-connect the cables that were removed from the Controller.
Note: The Controller automatically powers up when the power cords are
plugged in.

Verify Controller Component Status

1 From Guided Maintenance, verify that the status is Normal.
You can also verify the status by navigating to System > Hardware and
then selecting a chassis. The Overview page for the selected chassis lists the
status of each component.
Note: The Controller status will be visible several minutes after being
powered on. The Oracle FS1 Flash Storage System must load the operating
1 Thumb screws
2 Controller top cover
3 Controller
Controller Replacement Procedures
151