Open Pilot Top Cover; Figure 189: Pilot With Fan Door Open; Figure 190: Pilot Top Cover Removal - Oracle FS1-2 Customer Service Manual

Figure 189: Pilot with fan door open

Legend
Caution: Close the Pilot fan door within 60 seconds to maintain adequate
airflow to properly cool the server.

Open Pilot Top Cover

1 Press down on the push button on the Pilot top cover to release the top
cover and use the recessed areas to slide the top cover toward the back of
the Pilot about 0.5 inches (12.7 mm).
Caution: Before removing the top cover of the Pilot, power off the Pilot
using Guided Maintenance. Removing the Pilot top cover before powering
off the Pilot might cause damage to the operating system on the Pilot.
Tip: Slide out the Pilot top cover by pressing down on the grooves located
on both sides of the cover.

Figure 190: Pilot top cover removal

1 Fan door release tabs
2 Pilot fan door in open position
Pilot Replacement Procedures
226