Insert A Fan Module; Figure 184: Fan Module Insertion - Oracle FS1-2 Customer Service Manual

Legend
Note: When removing a fan module, do not rock it back and forth. Rocking
the fan module can cause damage to the motherboard connectors.
2 Set the fan module aside on an antistatic mat.
Note: When replacing a fan module, do not service any other components
unless the system is shut down and the power cords are removed.

Insert a Fan Module

1 Unpack the component from its shipping carton.
Note: Place the component on an antistatic mat if it must be set aside for
any reason.
2 Grasp the fan module tabs and press the fan down firmly into the fan
module compartment.

Figure 184: Fan module insertion

Legend
1 Fan module tab
2 Fan modules
3 Fan door
1 Fan module tab
2 Fan modules
3 Fan door
Pilot Replacement Procedures
219