Figure 36: A Phillips 13Mm Head Hex Flange Screw And The Front Of A Rack; Figure 37: Extended Rail To The Back Of The Rack - Oracle FS1-2 Customer Service Manual

Oracle FS1–2 Global Procedures

Figure 36: A Phillips 13mm head hex flange screw and the front of a rack

Legend
1 Phillips 13mm head hex flange screw 2 Rail-location pegs
5 From the back of the rack, position the pegs fully into the corresponding
rack holes.
To position the pegs, extend the length of the rail to the back of the rack
and position the pegs through the appropriate rack holes.

Figure 37: Extended rail to the back of the rack

70