System Power Requirements; System Packaging And Transportation; System Environmentals; Table 29: System Altitude Specifications - Oracle FS1-2 Customer Service Manual

Table 28: High voltage three-phase PDU for Oracle Flash Storage Systems
(continued)
High Voltage
Outlet groups for each PDU
PDU power cord length

System Power Requirements

The total power consumed by the Oracle FS1 Flash Storage System is dependent
on the configuration of the system. To determine the system electrical input
ratings for Oracle Flash Storage Systems that use the Oracle supported PDUs,
refer to the PDU information provided for Oracle Flash Storage Systems.
Oracle Flash Storage Systems require redundant input power feeds for proper
fault tolerant operation.
Note: Ensure that you have the exact power load and current requirements for
your specific Oracle FS System at hand.
If non-Oracle PDUs are used, you must determine the electrical input ratings of
the Oracle FS System configuration.

System Packaging and Transportation

All packaging and transportation are tested in accordance with Oracle Shipping
Package Test, Doc. No. 950-1291-01.

System Environmentals

Table 29: System altitude specifications

Mode
Operational
Non-operational
Oracle FS System Hardware Specifications
3Ph (5W + ground)
6
2 meters (6.6 feet)
PDU power cords are 4 meters (13 feet)
long, but sections are connected for internal
routing in the rack.
Elevation
–196 to 10498.7 feet (–60 to 3,200 meters)
–196 to 40026.2 feet (–60 to 12,200 meters)
239