Controller Power Supply LED Indicators
The LED indicators on the power supplies are at the left of the fan of each power
supply and provide power activity status.
Table 33: Controller power supply LED status and description
Icon
Controller Fan LED Indicators
A single bi-color LED represents the status of each fan module. The LEDs are on
the motherboard near each fan module, and are visible from the back panel of
the Controller when you look through the grill below the risers.
Table 34: Controller fan LED status and description
Color
Green
Amber
Note: There are two LEDs near the status LED for the third fan module. Do not
confuse the FPGA Good and FPGA Diagnostic LEDs with the status LED for the
third fan module.
Location
Name
Top
OK
Middle
Attention
Service
Required
Bottom
AC or DC
Status and meaning
The fan module is functional without fault.
The fan module has experienced a fault.
Oracle FS System LED Status
Color
Status and meaning
Green
On – Power supply
•
is functional
without fault.
Off – Power supply
•
is off or
initializing.
Flashing – No
•
function.
Amber
On – Normal fault
•
detected.
Off – No faults
•
detected.
Flashing – No
•
function.
Green
On – Input power
•
present and good.
Off – Input power
•
not present.
Flashing – No
•
function.
248