Complete The Component Replacement; Verify Controller Component Status; Figure 71: Close Controller Top Cover - Oracle FS1-2 Customer Service Manual

Place the top cover of the Controller and tighten the two thumb screws at
the back of the Controller that secure the top cover.

Figure 71: Close Controller top cover

Legend

Complete the Component Replacement

1 Slide the Controller back into rack position.
2 Re-connect the cables that were removed from the Controller.
Note: The Controller automatically powers up when the power cords are
plugged in.

Verify Controller Component Status

1 From Guided Maintenance, verify that the status is Normal.
You can also verify the status by navigating to System > Hardware and
then selecting a chassis. The Overview page for the selected chassis lists the
status of each component.
1 Thumb screws
2 Controller top cover
3 Controller
Controller Replacement Procedures
101