Figure 33: Rack Flange, Rail Flange, And Rail Label (Front) - Oracle FS1-2 Customer Service Manual

Figure 33: Rack flange, rail flange, and rail label (front)

Legend
1 Rack flange
4 Insert and loosely tighten one screw through the front of the rack and into
the top hole in the rails.
5 Adjust the rail lengths and locate the back pins inside the corresponding
back rack holes.
6 Insert and loosely tighten one screw through the back of the rack and into
the back of the rails.
Oracle FS1–2 Global Procedures
2 Rail flange and label
67