Component Numbering; Table 13: Component Placement With Four Replication Engines - Oracle FS1-2 Customer Service Manual

Table 12: Component placement with three Replication Engines (continued)
Component type
Controller-2
Remaining Drive Enclosures
If the Oracle FS System includes four Replication Engines, then follow the
placement shown in the following table:

Table 13: Component placement with four Replication Engines

Component type
Drive Enclosures
Replication Engine-4
Replication Engine-3
Replication Engine-2
Replication Engine-1
Pilot-0
Pilot-1
Controller-1
Controller-2
Remaining Drive Enclosures

Component Numbering

Oracle FS Systems support two Pilots (Pilot-1 and Pilot-2). Additionally,
Oracle FS Systems support two Controllers (Controller-1 and Controller-2) and 1
to 30 Drive Enclosures (DE-1 to DE-30).
The chassis ID number of the Drive Enclosure is based on the order by which the
Controller identifies the Drive Enclosures. Drive Enclosures are also assigned a
chassis ID number in the Oracle FS System Manager GUI that is labeled
Enclosure Chassis ID. The chassis ID number can be changed using the GUI. The
chassis ID number displayed on the chassis must always match the Enclosure
Chassis ID displayed on the GUI.
RU space for installation
RU 25, RU 26
RU 27 to RU 42
RU space for installation
RU 1 to RU 12
RU 13, RU 14
RU 15, RU 16
RU 17, RU 18
RU 19, RU 20
RU 21
RU 22
RU 23, RU 24
RU 25, RU 26
RU 27 to RU 42
Oracle FS1–2 Global Procedures
RU space if a DE2-24C
DE follows RU 12
RU 23, RU 24
RU 25 to RU 28 (next
DE2-24C DE)
RU 29 to RU 42
RU space if a DE2-24C
DE follows RU 10
RU1 to RU10
RU 11, RU 12
RU 13, RU 14
RU 15, RU 16
RU 17, RU 18
RU 19
RU 20
RU 21, RU 22
RU 23, RU 24
RU 25 to RU 28 (next
DE2-24C DE)
RU 29 to RU 42
41