Table 14: Controller Rail Kit Mounting Screws - Oracle FS1-2 Customer Service Manual

One slide rail that attaches to the rack posts
•
One mounting bracket that attaches to the Controller chassis
•
CMA with six pre-installed cable clips
•
Package of mounting screws and nuts in assorted sizes to fit various types
•
of racks and cabinets
Manufacturer's instruction sheet for the CMA
•
The following table summarizes the mounting hardware packaged with the
Controller rail kits.

Table 14: Controller rail kit mounting screws

Contents of the mounting screw packet Quantity
10-32 pan head screw
8-32 pan head screw
Metric M6 pan head screw
6–32 flat head screw
Tip: Ensure that you have all of the parts in the Controller rail kit before you
begin the installation of the Controller rails on the rack and the Controller
chassis.
Note: To locate part numbers for the rail kits, open
(https://support.oracle.com/handbook_private/index.html) and go to the
Oracle FS1 Flash Storage System components list. Part numbers are listed in the
components list.
Related Links
Controller Rails
Oracle FS1–2 Global Procedures
8
4
8
2
Oracle System Handbook
Usage
Assemble main and
extender sections of
left and right rails
(Typically, left and
right rails are shipped
pre-assembled)
Mount left and right
rails to front of
cabinet rails
Mount left
•
and right rails
to back of
cabinet rails
Secure front
•
of chassis to
left and right
cabinet rails
Secure back of chassis
to left and right side
rails
45