This chapter describes each of the SL3000 library modules and their major hardware
components. For dimensions and weights, see
Library Modules
Base Module
■
Drive Expansion Module
■
module only.
Cartridge Expansion Module
■
centerline and four to right of centerline.
Parking Expansion Module
■
of the library for the redundant robotics feature. A PEM is a converted CEM.
Access Expansion Module
■
the library. An AEM cannot be installed directly to the left of the Base module.
Figure 2–1 SL3000 Library Configuration Example
Figure Legend:
Perforated window
1.
Operator panel
2.
Service door
3.
Library Modules and Hardware
2
(Base) — one required per library.
(DEM) — maximum of one on the left side of a Base
(CEM) — maximum of eight with four to left of
(PEM) — must install as a pair with one on each end
(AEM) — maximum of two with one on each end of
Chapter 7, "Site
Planning".
Library Modules and Hardware 2-1
2