Remove The Power Supply Slot Cover; Insert A Power Supply Into The Slot - Oracle SL150 Library Manual

3 - Encryption Indicators
4 - Thumbscrew (One on Each Side of the Tray)
Related Topics
• Tape Drives
Tape drives read and write data on tape cartridges. The SL150 supports LTO
half-height SAS and FC drives.
• Power Requirements
Power usage for the SL150 depends on the components installed.

Remove the Power Supply Slot Cover

The power supply filler covers an empty power supply slot.
WARNING:
Do not operate the library with an open and empty power supply or tape
drive slot. Always have a cover in place.
Hook your finger in the hole of the power supply cover.
1.
Pull the cover from the power supply slot and set it aside.
2.

Insert a Power Supply into the Slot

Power supplies provide power to the tape drives and library components.
Remove the power supply filler from the slot (see
1.
Cover).
Remove the power supply from the shipping carton.
2.
Grasp the power supply by the handle with one hand and support the bottom of
3.
the supply with your other hand.
Guide the power supply into the power supply slot.
4.
Make sure the power supply is latched in place.
5.
Install Power Supplies and Tape Drives
Remove the Power Supply Slot
Chapter 2
2-27