Storage Tek T10000D T; Module Overview; Ape Drive - Oracle StorageTek T10000D Manual

2 S T
TORAGE EK

2.1 Module Overview

Oracle's StorageTek T10000D Tape Drive (Hardware Part #: 7042136/7314405;
Firmware Version: RB411111) blends the highest capacity, performance,
reliability, and data security to support demanding, 24/7 data center operations.
The T10000D delivers fast write speeds (252 MB
magnetic tape storage; making it ideal for data center operations with growing
data volume. The T10000D provides data protection with built-in AES
encryption and multiple FIPS 140-2 Approved modes of operation. Customers
can be assured that their data will always be secure, in any of these FIPS 140-2
Approved modes. The T10000D encrypting tape drive (ETD) operates with data
encryption services:
 permanently enabled
 temporarily enabled
 temporarily disabled
Each encryption mode provides FIPS 140-2 Approved security services and
functionality to ETD operators. For added flexibility, a mixed mode of operation
supporting both FIPS 140-2 Approved and non-FIPS 140-2 Approved operations
is also available. This mode of operation provides a non FIPS-140-2 Approved
method for encrypting the tape cartridge contents for customers who do not
require FIPS 140 protected content.
The StorageTek T10000D Tape Drive is featured in Figure 1 below.
2 MB – Megabytes
3 sec – Second
4 AES – Advanced Encryption Standard
This document may be freely reproduced and distributed whole and intact including this Copyright notice.
T10000D T D
APE
© Copyright 2017 Oracle Corporation
RIVE
2 3
/sec ) to a native 8.5 TB of
4
hardware
Page 8 of 51